Do I need to be connected to WiFi to register?
No, you can also register your IDx at osstellconnect.com. All you need is the serial number.
How can I delete ISQ values (e.g. in case I have accidentally measured twice from the same direction)?
Values can only be removed before saving clicking on the trash bin symbol. After saving the data cannot be modified.
How can I save patient data?
The patient data can be saved either in the instrument or on Osstell Connect.
How do I add patient information?
Perform measurements, press End patient, and then save as Add new patient.
How do I edit patient information?
Simply select the pen symbol in the patient list to edit.
How do I get started?
Simply register your IDx by following the instructions in the device or by going to
osstellconnect.com
How do I perform a measurement?
Simply choose a tooth position on the touch screen and start measuring.
Is the IDx Portal both Windows and Mac compatible?
Yes, Osstell Connect is accessible via iPhone, iPad, Mac or PC.
What are the requirements for Osstell Connect access?
Just connect the instrument via wifi and follow the instructions on the screen. A confirmation
email with login details will be sent to your email address.
What is the battery life of the Osstell IDx?
For normal use, the batteries last for at least one day but in most cases longer. It takes about 2
hrs to charge the IDx from a fully discharged state.
What is the warranty on IDx?
Why do I need a backup code?
To enable automatic backup of your Osstell IDx, you will be asked to create a backup code made up of 8 characters. The purpose of the backup is to reset the unit if you for some reason remove patients by mistake or lose your instrument. The code is created during the registration process and you only have to enter it once. To make sure you can access your backup at a later date, it is VERY important that you write this code down and keep it in a safe place.
Backup can also be done via USB without a code.
Why do I need to set Date and Time again?
The IDx consumes power when it is turned off, so if the battery is totally drained and down at 0% the settings for date and time will be lost. If the battery is drained the IDx will ask you to set date and time again at start-up. If you connect the IDx to the internet, the date and time will be set automatically.
Why has the instrument been locked?
Have you registered your device? You can only use the Osstell IDx for a limited time without
registration.
Will Osstell Connect be connective with other systems, such as Dentrix?
No, for the moment is it not possible to connect to other patient data system.
